Electrolux washer error code

E30

Water level sensing problem

The washer cannot correctly measure or monitor the water level inside the drum.

Also shown on some Electrolux models as: C3

Try these free fixes first

Unplug the washer before opening any panel.

  1. Check the water supply hose for drips at both the tap end and the machine end.
  2. Look for clothing caught between the door glass and the rubber seal, and inspect the seal for tears.
  3. Unplug the washer and turn off the water, then tilt it back slightly for half a minute to let trapped water drain out.
  4. Clean the small filter in the inlet hose connection.
  5. Cut back on detergent to avoid excess foam, then try a new cycle.

Still showing E30?

If the code returns after a reset and these checks, a technician should test the water level pressure sensor and its tubing.

Water level pressure sensorCheck that the part matches your exact model number (usually on a sticker inside the door or on the back).Find the part
Prefer a pro?Compare quotes from local appliance repair services.Get repair quotes (soon)

Questions people ask

What does E30 mean on a Electrolux washer?

E30 on a Electrolux washer means: water level sensing problem. The washer cannot correctly measure or monitor the water level inside the drum.

How do I fix Electrolux washer error E30?

Check the water supply hose for drips at both the tap end and the machine end. Look for clothing caught between the door glass and the rubber seal, and inspect the seal for tears. Unplug the washer and turn off the water, then tilt it back slightly for half a minute to let trapped water drain out. Clean the small filter in the inlet hose connection. Cut back on detergent to avoid excess foam, then try a new cycle.

When should I call a repair technician?

If the code returns after a reset and these checks, a technician should test the water level pressure sensor and its tubing.

Related washer codes

Electrolux E10Washer: Water not filling properlyElectrolux E20Washer: Washer not drainingElectrolux E40Washer: Door not lockedElectrolux E50Washer: Motor faultElectrolux E60Washer: Water heating problemElectrolux EF0Washer: Leak, foam or unbalanced load

Source: Electrolux official support · Reviewed 2026-10-01