Electrolux washer error code

E50

Motor fault

The washer has detected a fault with the drive motor or the system that controls it.

Also shown on some Electrolux models as: C9 F9

Try these free fixes first

Unplug the washer before opening any panel.

  1. Switch the washer off at the wall socket or breaker.
  2. Wait about a minute, then restore power.
  3. Remove some laundry if the drum was heavily packed and start a new cycle.
  4. Stop using the machine if the code comes straight back.

Still showing E50?

If the code returns after a reset, call a technician to diagnose the motor or motor control board.

Drive motor or motor control boardCheck that the part matches your exact model number (usually on a sticker inside the door or on the back).Find the part
Prefer a pro?Compare quotes from local appliance repair services.Get repair quotes (soon)

Questions people ask

What does E50 mean on a Electrolux washer?

E50 on a Electrolux washer means: motor fault. The washer has detected a fault with the drive motor or the system that controls it.

How do I fix Electrolux washer error E50?

Switch the washer off at the wall socket or breaker. Wait about a minute, then restore power. Remove some laundry if the drum was heavily packed and start a new cycle. Stop using the machine if the code comes straight back.

When should I call a repair technician?

If the code returns after a reset, call a technician to diagnose the motor or motor control board.

Related washer codes

Maytag F7 E1Washer: Control problem, try resetElectrolux E10Washer: Water not filling properlyElectrolux E20Washer: Washer not drainingElectrolux E30Washer: Water level sensing problemElectrolux E40Washer: Door not lockedElectrolux E60Washer: Water heating problem

Source: Electrolux official support · Reviewed 2026-10-01