Frigidaire washer error code

E1

Slow or no water fill

Water is not entering the washer, or filling is taking much longer than it should.

Try these free fixes first

Unplug the washer before opening any panel.

  1. Make sure the lid is fully closed before starting the cycle.
  2. Turn both the hot and cold supply faucets all the way open and confirm your home has normal water pressure.
  3. Straighten any kinks or sharp bends in the inlet hoses behind the washer.
  4. Turn off the faucets and unplug the washer, then disconnect the inlet hoses and rinse the small filter screens at the washer end before reconnecting.
  5. Restart the cycle and check that no water is leaking from the tub area.

Still showing E1?

If water still will not fill with good supply and clean screens, a technician usually needs to test the water inlet valve or the pressure sensor.

Water inlet valveCheck that the part matches your exact model number (usually on a sticker inside the door or on the back).Find the part
Prefer a pro?Compare quotes from local appliance repair services.Get repair quotes (soon)

Questions people ask

What does E1 mean on a Frigidaire washer?

E1 on a Frigidaire washer means: slow or no water fill. Water is not entering the washer, or filling is taking much longer than it should.

How do I fix Frigidaire washer error E1?

Make sure the lid is fully closed before starting the cycle. Turn both the hot and cold supply faucets all the way open and confirm your home has normal water pressure. Straighten any kinks or sharp bends in the inlet hoses behind the washer. Turn off the faucets and unplug the washer, then disconnect the inlet hoses and rinse the small filter screens at the washer end before reconnecting. Restart the cycle and check that no water is leaking from the tub area.

When should I call a repair technician?

If water still will not fill with good supply and clean screens, a technician usually needs to test the water inlet valve or the pressure sensor.

Related washer codes

Samsung 4CWasher: Not filling with waterSamsung OEWasher: Overflow / too much waterLG IEWasher: Water inlet errorLG FEWasher: Water overfillingLG PEWasher: Water level sensor errorBosch E17Washer: Water takes too long to fill

Source: Frigidaire official support · Reviewed 2026-10-01