Maytag washer error code

F8 E1

Slow or no water fill

The washer is not sensing the right amount of incoming water, so filling is taking too long.

Also shown on some Maytag models as: F8E1 LF Lo FL

Try these free fixes first

Unplug the washer before opening any panel.

  1. Make sure both the hot and cold water taps are fully open.
  2. Check the inlet hoses for kinks and confirm red goes to hot and blue goes to cold.
  3. Turn off the water, disconnect the hoses and clean mineral buildup from the inlet screens.
  4. Confirm the drain hose is not pushed too far into the drain or sealed with tape, which can siphon water out.

Still showing F8 E1?

If water supply and hoses are fine, a technician should check the water inlet valve.

Water inlet valveCheck that the part matches your exact model number (usually on a sticker inside the door or on the back).Find the part
Prefer a pro?Compare quotes from local appliance repair services.Get repair quotes (soon)

Questions people ask

What does F8 E1 mean on a Maytag washer?

F8 E1 on a Maytag washer means: slow or no water fill. The washer is not sensing the right amount of incoming water, so filling is taking too long.

How do I fix Maytag washer error F8 E1?

Make sure both the hot and cold water taps are fully open. Check the inlet hoses for kinks and confirm red goes to hot and blue goes to cold. Turn off the water, disconnect the hoses and clean mineral buildup from the inlet screens. Confirm the drain hose is not pushed too far into the drain or sealed with tape, which can siphon water out.

When should I call a repair technician?

If water supply and hoses are fine, a technician should check the water inlet valve.

Related washer codes

Samsung 4CWasher: Not filling with waterSamsung OEWasher: Overflow / too much waterLG IEWasher: Water inlet errorLG FEWasher: Water overfillingLG PEWasher: Water level sensor errorBosch E17Washer: Water takes too long to fill

Source: Maytag official support · Reviewed 2026-10-01